1. If required by construction, the rock can be cut to adjust.
2. Fill the gap with plastic bags and pay attention to the depth. The deeper the gap, the better the three-dimensional effect of the product.
3. After the initial setting of the caulking agent, remove the excess caulking material with bamboo chips, etc., and repair the surface of the gap with a wet brush. If there is a small amount of caulking agent or adhesive on the rock surface, let it dry After that, remove it with a brush. better. Some products do not require seams.
4. When the rock is used outdoors, after the paving is completed, the product and the caulking agent can be sprayed with protective agent for protective treatment (waterproof, antifreeze, anti-ultraviolet, anti-return alkali, etc.) after the product and the caulking agent are completely dried.
5. Treatment of the requirements for remaining joints (1) Random-shaped rock-the smallest joint circumference is about 10mm, and the difference in the size of the chaotic shape should be adjusted with a joint filler.
