Professional Stone Cut-to-Size csempe és munkalapok Factory

Lapossági ellenőrzés minősége pala

Legfrissebb hírek

Kapcsolatfelvétel

Lapossági ellenőrzés minősége pala

Place a steel flat ruler with a straightness tolerance of 0.1mm on the two diagonal lines of the inspected surface naturally, and measure the gap between the ruler surface and the board surface with a feeler gauge or vernier caliper.

The measured value of the maximum gap indicates the flatness of the board. The measured value is accurate to 0.1mm.

1.Black Slate Floor Tiles

Ön is szeretheti

Ajánlatkérés küldése

Érdeklődés